Applications | Details | Function | Technical data
|
Briquetting presses GP Genius 2/50, 2/60, 2/70
for volume reduction and production of heating material
The GP Genius series was developed for briquetting chips and dusts
especially. These high-performance, robust and high-quality machines
compress homogenous material to form com-pact briquettes. Due to its
highly effective hydraulic system, their wattage is extremely low
considering their briquetting output.
The machine is extremely silent, requires only little room and can be
set up almost anywhere. With the automated material feed, no operating
staff is necessary.
The machines have been designed as system components and can therefore
be easily customised.
|
 |
Applications | go to top
|
Volume reduction up to 90 %
|
 |
2,5 kg wood briquettes ~ 1 l heating oil
1 t wood briquettes ~ 400 l heating oil
|
Applications:
· Volume reduction
· Recycling
· Document disposal
· Compacting filter dust
· Recyclable waste
· etc. |
|
Material suited for Briquetting:
· Shavings from wood
processing
· Filter dust
· Wood chips
· Hay
· Paper
· Polyurethane foam
· Styrofoam
· etc
|
Advantages from volume reduction:
· Reduced storage
and
transport costs
· With briquettes,
there is
almost no risk of self
-ignition or dust explosion
· Reduction of energy costs
through use as fuel
|
|
With the continuous production of waste
material it makes sense and becomes
necessary to provide for their appropriate
and efficient disposal. |
 |
Details | go to top
|
 |
|
 |
|
 |
|
 |
Filling cylinder with damped end bearing
and dust-tight filling shaft.
|
|
Agitator, conveyor worm supercharger
and level sensor inside |
|
Nonwearing electronic sensors |
|
Adjustable pressure |
 |
|
 |
|
 |
|
 |
| Easy transport |
|
PLC-Control |
|
Transport pipe connection |
|
distributing warehouse |
Function | go to top
|
 |
 |
Mode of Operation:
Material is fed into the hopper (holds about 1 m³) manually or with
a filtering installation. The agitator continuously fills the channel of
the spiral output. The conveyor then transports the material to the
pre-compressor. A hydraulic fill pusher then pushes the material into
the actual press chamber. The pressing tongs that are also hydraulically
controlled, compress the material in connection with a specially
hardened press cylinder and provide excellent briquette quality.
Compression is performed without binding agents. |
Technical data | go to top |
| |
 |
All models are supplied complete with hydraulic oil as well as
safety switches for oil temperatures and the PLC for fully
automatic operation.
Demonstrations and tests with your materials are possible in our
technical laboratory by prior agreement.
Further technical information in the brochure
Briquetting press Genius brochure download |
